Toa VM-3000 Series - Manual (Page 50)

50
In the case of the VM-3000E having the local input, functions assigned to the unit's individual general control
inputs are fixed as follows, and cannot be changed to any other function.
General Control Input 1: Allows for broadcasts to the corresponding VM-3000E's OUTPUT 1.
General Control Input 2: Allows for broadcasts to the corresponding VM-3000E's OUTPUT 2.
General Control Input 6: Allows for broadcasts to the corresponding VM-3000E's OUTPUT 6.
General Control Input 7: Allows for broadcasts to the corresponding VM-3000E's all OUTPUTS 1 - 6.
General Control Input 8: Not used
(VM-3000E's General Control Input Setting screen)
[Function setting for the VM-3000E having the local input]
Note
This function can be used only when all the versions of VM-3000VA firmware, VM-3000E firmware, and
VM-3000 Setting Software are 2.00 or later.