Toa VM-3000 Series - Manual (Page 57)

57
(3) Name
Sets the name for the key.
(4) Function
Sets the function to be assigned to the key.
* Can be set only when all the versions of VM-3000VA firmware, VM-3000E firmware, and VM-3000
Setting Software are 2.00 or later.
(5) Contents 1
• Cannot be used when "Disable," "All Call," or "Failure output reset" has been selected in the Function
settings (4).
• Used to set broadcast zones when "Zone Selection" has been selected in (4) Function settings. Only the
zones registered in the
Zone settings (page 46) can be set.
• Used to set the surveillance group for the failure indicator corresponding to
this key when "Failure Receipt" has been selected in (4) Function settings.
The detection items are the surveillance items referred to in the
Surveillance
settings (page 38) .
(6) Contents 2
• Can be set when "Zone Selection" has been selected in (4) Function settings.
• Selecting the unit designates the emergency status output to interlock.
* Can be set only when all the versions of VM-3000VA firmware, VM-3000E firmware, and VM-3000
Setting Software are 2.00 or later.
(7) Previous button
Pressing this button returns the display to the previous key function setting screen for the RM-320F or the
key function display screen for the RM-300MF.
(8) Next button
Pressing this button moves the display to the next key function setting screen for the RM-320F.
Available Settings Disable (default), Zone Selection, Failure Receipt, All Call, Failure output reset*
Available Settings Disable (default), Zone 1 – 90
Available Settings Surveillance group name
(default names are Surveillance*, in which "*" is the group number.)
Failure indicator
Available Settings 16 alphanumeric characters (default name: RM300MF/#320/$*, in which
"#" is the RM-300MF's ID number, "$" is the ordinal number of the RM-320F and
"*" is the key number.)
Available Settings Disable (default), All*, VM-3000VA*, VM-3000E (#)*
("#" is an ordinal number)