Toa VM-3000 Series - Manual (Page 43)

43
(4) Internal ATT., External ATT., Master Volume
Volume adjustment operation for the internal attenuator (speaker output volume knob), external attenuator,
and master volume control will differ depending on the priority levels.
(5) Priority Control
Selects how to assign priority among multiple general broadcast sound sources all set to the same priority
level.
Note
It is not possible to specify a different control system for individual sound sources, or for individual
priorities.
Priority Internal ATT. External ATT. Master volume
1, 2 Bypass Bypass Bypass
3, 4 Bypass Enable Bypass
5, 6 Bypass Enable Enable
7 (MIX) Enable Enable Enable
8 (BGM) Enable Enable Enable
Available Settings FIFO (first in first out), LIFO (last in first out, the default)
Sound Source Type Priority Setting Range Default
INPUT 1 - 4 1 - 6, 7 (MIX) 6
EV1 - EV6 (built-in sound sources) 1 - 6 6
RM 1 - 4* 1 1 - 6 6
BGM 1 - 2 8 (BGM) 8 (BGM)
VM - 3000E (1) - (9)* 2 1 - 6 6
(3) Priority
Sets general broadcasting sound source priorities. The lower the number, the higher the priority.
The priority range possible for a given sound source will differ depending on its type.
* 1 The number of RM remote microphones will change depending on the settings.
* 2 This function can be used only when all the versions of VM-3000VA firmware, VM-3000E firmware, and
VM-3000 Setting Software are 2.00 or later.
See "General Broadcast Priorities" in the separate manual for more information on general broadcast
priority settings.