Toa VM-3000 Series - Manual (Page 78)

78
Pressing the "Yes" button displays a dialog for saving the set data. Assign a filename and save the data.
(Refer to "Saving Set Files" on page 69.)
If the "No" button is pressed, the setting software is terminated without saving the set data.
Pressing the "Cancel" button returns the display to the currently displayed screen.
If the set data has not been saved, the following dialog is displayed.
13.7. Exiting Setting Software
Exit the setting software after completing all settings and required file output production.
Select "File Exit" from the menu bar of the Setting Software screen.