Loading set vm-3000va data into a pc – Toa VM-3000 Series User Manual
Page 82
82
T R A N S M I T T I N G
C O M P L E T E
The transferred setting content is displayed on the current setting screen when the data has been transferred.
In this event, the VM-3000VA's LCD screen displays as follows:
13.10. Transferring Data Edited by PC between the VM-3000VA and a PC
Data edited with a PC can be written into the VM-3000VA or the same data written into the VM-3000VA can
be loaded into the PC.
Notes
•
Data edited using the VM-3000VA's LCD screen cannot be transferred. Only the data that has been set
using the PC setting software can be transferred.
•
To use this function, be sure to perform network settings in advance
•
To transfer set data, the setting software must be operated. Also, operations for transferring the set data are
required on the VM-3000VA side with a PC connected to the VM-3000VA. (For details, please read the
separately issued instruction manual.)
The following are operations based on the setting software.
13.10.1. Loading set VM-3000VA data into a PC
Select "Communication
Setting Data: VA->PC" from the menu bar of the Setting Software screen.