Log display, P. 62) – Toa VM-3000 Series User Manual
Page 62
62
(1) VA -> PC button
Used to load log data from the VM-3000VA to a PC.
Note
Since this operation is conducted with the VM-3000VA connected to the PC, be sure network settings are
performed in advance
. Further, log data transfer operation is required on the VM-3000VA as
well. For more information, please read "Configuration Settings" in the separately issued instruction
manual.
(2) Log File Reading button
Reads out log data stored in the PC.
Press the "Log File Reading" button to select and read the log files stored in the PC.
(3) Log File Save button
Used to save log files to a PC.
Press the "Log File Save" button. As the screen designating the destination to save is displayed, save the
log file.
(4)
(3)
(2)
(1)
11. LOG DISPLAY
Clicking the Menu item [Log] button displays the log screen.
Operation histories recorded in the VM-3000 system can be displayed using setting software. It is also
possible to save displayed log data to a PC and read it from the PC. There are two types of log data: one that
records all operations (All Log) and one that only records failures (Failure Log). A total of up to 1,000 histories
can be recorded for both operation and failure logs, but up to 100 histories out of them can be recorded for
failure logs.