Toa VM-3000 Series - Manual (Page 87)

87
(3) "Reset" button
Deletes the EV message file registered in the PC.
(4) "Play" button
Play backs the EV message(s) registered in the PC.
The message(s) can be heard by means of the PC speaker or headphones connected to the PC.
(5) "Stop" button
Stops the EV message played back using the "Play" button (4).
(6) "PC->VM-3000VA" button
Transfers individual EV message files to the VM-3000VA.
Note
If an EV message file with the same message number already exists in the VM-3000VA, it will be
overwritten.
(7) "Delete" button
This button is displayed when there is no message file on the message file registration screen (i.e. when
the [File Select] box is blank).
Pressing this button causes this EV message number file to be deleted from the VM-3000VA.
Note
To delete message files read into the screen, first press the "Reset" button to delete the message from the
registration screen, then press the "Delete" button.
(8) "PC->VM-3000VA" button
Simultaneously transfers all EV message files registered on this screen to the VM-3000VA.
Attention!
Transferring no audio file registered on the screen will erase all existing audio files in the VM-3000VA.
The following indication is displayed on the VM-3000VA's LCD screen after transfer completion.
(9) "Save" button
Saves all EV message files registered on this screen to the folder designated by the PC.
Pressing this button displays the folder selection dialog.
Select the folder the files are to be saved to, then click the "OK" button.
(10) "Close" button
Closes the message file registration screen.
R E C E I V I N G
C O M P L E T E