Toa VM-3000 Series - Manual (Page 61)

61
(3) Name
Sets the name for the key.
(4) Function
Sets the function to be assigned to the key.
(5) Zone
Cannot be set when "Disable" has been selected in the Function settings (4).
• Used to set broadcast zones when "Zone Selection" is selected in (4) Function settings. Only the zones
registered in the
Zone settings (page 46) can be set.
• If "EV Start" has been selected in the Function settings (4), set the desired EV message (built-in sound
source).
(6) Control Output
• Cannot be used when "Disable" or "EV Start" has been selected in the Function settings (4).
• If "Zone Selection" has been selected in the Function settings (4), set the control output to be activated.
(7) Previous Button
Pressing this button returns the display to the previous key function setting screen for the RM-200M or RM-
210 unit.
(8) Next Button
Pressing this button moves the display to the next key function setting screen for the RM-210.
Available Settings Disable (default), Zone Selection, EV Start
Available Settings Disable (default), Zone 1 – 90
Available Settings 16 alphanumeric characters (default name: RM200M/# 210/$*, in which "#" is the
RM-200M's ID number, "$" RM-210's is ordinal number, and "*" is the key number.
Available Settings EV-1 to EV-6 (default: EV-1)
Available Settings Disable (default), VA-GENERAL-CI 1 – 8, E#-GENERAL-CI 1 – 8, in which "#" is
the VM-3000E's ordinal number.)