Vexilar CLC-200 - Manual (Page 21)

21
TYPICAL INDICATIONS
If the AUTO_R AND AUTO_G modes are set to on, the
CLC-200 will find bottom and adjust the gain for the best
view automatically. This can take just a short moment or a
few minutes, depending on the depth and conditions. As
soon as the bottom begins to sweep across the screen in the
graphical view, the digital readout of the depth will appear
in the information view.
You can determine the general hardness of the bottom
by looking at the color content and width of the bottom
signal. Generally, harder bottoms will contain the stronger
echo colors and be of a fairly narrow width. Softer bottoms
will contain weaker echo colors and have a wider overall
width.
Figure 16
Surface Line
Bottom
Fish
Current
Depth
Depth Scale
Scroll Rate
Gain
Level
Battery
Power
0 - 100 %
AutoRange (on) AutoGain
(off)