Winco DSE3000 Series - Manual (Page 25)

DSE Model 3000 Series Control & Instrumentation System Operators Manual
Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM 25
8 MODULE DISPLAY
8.1 TIMER ICON
When the module is controlling the engine (starting and stopping) an animated timer icon will be displayed in the
icon area to indicate that a timer is active, for example cranking time, crank rest etc.
8.2 STOPPED ICON
When there are no alarms present, an icon will be displayed to indicate the engine is stopped and what mode the
unit is in.
Stop
mode
Auto
mode
Manual
mode
The hand is only displayed when the ‘arming options’ is enabled, otherwise the engine starts when entering the
manual mode.
8.3 RUNNING ICON
When there are no alarms present, an animated icon is displayed to indicate the engine is running :
8.4 USB ICON
When a USB connection is made to the module the USB icon is displayed :
8.5 MEMORY CORRUPTION
If either the config file or engine file becomes corrupted the unit will display the following icon :
8.6 BACKLIGHT
The backlight will be on if the unit has sufficient voltage on the power connection while the unit is turned on, unless
the unit is cranking for which the backlight will be turned off.