Winco DSE3000 Series - Manual (Page 27)

DSE Model 3000 Series Control & Instrumentation System Operators Manual
Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM 27
9 FRONT PANEL CONFIGURATION
This configuration mode allows the operator limited customising of the way the module operates.
Use the module’s navigation buttons to traverse the menu and make value changes to the parameters:
9.1 ACCESSING THE FRONT PANEL EDITOR (FPE)
Press and buttons simultaneously. The display shows the configuration icon :
The first parameter is also displayed.
Increase value / next item
Accept
Decrease value / next item
Current value
Configuration mode
icon
Parameter number
Next page