2 communications option connections – Winco DSE3000 Series User Manual
Page 40
DSE Model 3000 Series Control and Instrumentation System Operators Manual
40
Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM
15.2 COMMUNICATIONS OPTION CONNECTIONS
15.2.1 DESCRIPTION
The 3000 series configuration software allows the controller to communicate with a PC. The computer connects to
the module as shown below and allows easy adjustment of the operating parameters and firmware update of the
controller.
15.2.2 PC TO CONTROLLER (DIRECT) CONNECTION
To connect a 3000 series module to a PC the following items are required: -
•
3000 series module
•
3000 series configuration software (Supplied on configuration suite
software CD).
•
USB cable Type A to Type B.
NOTE:- The DC supply must be connected to the module for configuration by PC.
NOTE:- Refer to 3xxx software Manual for further details on configuring the module by PC.