Sears KENMORE 11682 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Prepare the Bobbin
• To Remove the Bobbin Case from the Machine
Wind the Bobbin
the machine by pulling it to the
left. Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
tie, pull open latch of bobbin case.
Pul! bobbin case straight out of
clutch knob inside the hand wheel
toward you to stop the needle from
moving while you winding the
bobbin.
shuttle.
Advertising
This manual is related to the following products: