Sears KENMORE 11682 - Manual (Page 22)

SECTION 3. LEARN THE STITCHES
Straight Stitches (Continued)
• Use the Darning Plate
SamfidoKt v v i № - w a n t
to control the fabric youself.
The Darning Plate covers the feed dogs
so that they do not touch the fabric.
To Put on the Darning Plate;
NOTE: The rectangular holes in the
Darning Plate match the
holes in the needle plate. In
the darning plate, these
holes are slightly to the left
of center.
1. Position the darning plate with
the 3 pins on the bottom.
2, Fit the darning plate pins into the
needle plate holes. The feed dogs
will show through the darning
plate holes.
Use the darning plate in the following
ways: Darning (P. 19)
Button Sewing {P. 23)
Topstitching
Set the Machine
Stitch Stitch selector
control 2 to 6
.. BH-
-3"*
Zigzag foot
V L,* ? '
Top thread tension Stitch length
control orange
zone
Mere% How
1. Lower the presser foot.
2. Keep the edge of the fabric next
to the right edge of the presser
foot.
3. Evenly guide the fabric along this
edge to produce an even row of
topstitching 3/8" from the edge.
The Stitch and Its Uses
Topstitching emphasizes the lines of
your garment and keeps seams and
edges flat and crisp.
Accent suits or blouses with one or
two rows of topstitching around the
outer edges of cuffs, lapels or collars.
Left Needle Position
control while topstitching or edge
stitching difficult fabrics.
NOTE: Use only
foot for
Sewing.
Zigzag
Left
presser
Needle
18