Prepare your top thread, Prepare your top thread ~11 – Sears KENMORE 11682 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Prepare Your Top Thread
• Thread Your Needle
SECTION 2, PREPARE YOUR MACHINE FOR SEWING
The numbered steps above follow the numbers
on the illustrations.
Dotted lines show places where the thread
loops and then is pulled tight.
1.
Draw thread into thread guide using both hands.
2.
While holding thread near spool, draw thread down into the tension area and then around the
check spring holder.
3.
Firmly draw thread up and through take-up lever from right to left.
4.
Draw thread down and slip it into needle bar thread guide.
5.
Thread needle from front to back.
NOTE: You may want to cut the end of thread with sharp scissors for easier needle threading.
10