Sears KENMORE 11682 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
■ Pick Up Your Bobbin Thread
A
thread loosely in left hand and rotate
handwheel toward you one complete
turn.
2. Bring bobbin thread up by pulling
top thread.
back of the presser foot, leaving
4
to
6
inches of thread clear.
If you cannot pick up bobbin thread by following steps given above, then check;
1. Is needle threaded from front to back?
3.
Are 3 td^ThSies of thread coming from the shuttle?
4.
Is thread from shuttle tangled?
5.
Is bobbin properly installed in the bobbin case?
6
.
Is the machine threaded according to the instructions?
11
Advertising
This manual is related to the following products: