Sears KENMORE 11682 - Manual (Page 19)

Adjusting Stretch Stitch Balance
SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Revere Stitch Control
position.
In stretch stitch sewing. Stitch Length Control should
be in the detent position between Sand L (Tposition)
for most materials. Depending upon the type of fabric
used, you may need to adjust this control to match
forward stitches of stretch sewing with reverse motion
stitches.
To
toward- turn tov^^rd^-^Ti^^
L • ▼ • S
Smocking stretch
Rickrack stretch
To reverse stitch, hold down this control during
sewing.
Release to sew forward again.
15