Sears KENMORE 11682 - Manual (Page 35)

SECTION 3. LEARN THE STITCHES
8 . Open the zipper.
9. Lower the presser foot and stitch
the rest of the seam.
10. Close the zipper and
fabric right side up.
INVISIBLE ZIPPER AND CORDING
INVISIBLE ZIPPER
Adjust the foni so the needle is sewing through
the foot is riding on the teeth of the zipper as
shown. Follow the zipper manufacturer's inst­
ructions. After zipper has been inserted, finish
sewing seam by shifting foot to side position
sewing through side notch.
Foot can also be used to make cording for slip­
covers etc, Cover a cord with a strip of bias
fabric and sew as shown.
NOTE:
Use "Low Bar Sewing Machine ZIPPER FOOT"
(6757) for "invisible zipper" and "cording",
which can be obtained at any Sears retail store.
11. To sew the right side of the zip­
per, set the zipper foot on the
right side of the needle.
12. Stitch across and below the bot­
tom of the zipper.
13. Turn the corner and continue to
guide the foot along the zipper
teeth, as shown.
14. Stop about 2" from the top of the
zipper.
15. Lower the needle into the fabric
and raise the presser foot.
16. Remove the basting stitches and
open the zipper.
17. Lower the foot and stitch the rest
.......of the seara. Make sure .the-fold.......is
_
31