Sears KENMORE 11682 - Manual (Page 9)

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
• Setting Spool Pin • Adjust the Presser Foot Lever • Thread Cutter
The spool pin is used for holding the spool
of thread in order to feed thread to the
machine.
To use, pull up the spool pin. Push down
for stora(№.
The Presser Foot Lever raises and lowers your
presser foot.
You can raise it about 1 /4" higher than the normal
up position for easy removal of the presser foot or
to f№Jp. V£U..Atace.baauyJabEie$ under
You don't need a pair of scissors to cut the
thread after you finish sewing. Just use the
handy thread cutter.
Pull the threads to lengthen several inches