SINGER W714 - Manual (Page 15)

STRAIGHT STITCHING
13
For straight sewing on fine fabric or very soft ma­
terial, you may want to use the straight stitch presser
foot and the straight stitch needle plate which are in­
cluded in your accessory box. Both have narrow needle
slots.
Changing the Presser Foot and Needle Plate :
(1) Presser Foot
(A) Loosen thumb screw (19, Fig. 1) and
remove zigzag presser foot.
(B) Replace with straight stitch presser foot
(Fig. 22A).
(2) Needle Plate
(A) Slide cover plate (17, Fig. 1) to the left as
far as possible.
Remove screws holding needle plate (16,
Fig. 1) to bed plate.
Remove zigzag needle plate.
Replace with straight stitch needle, plate
(Fig. 22B).
Be sure to set the stitch width and buttonhole
control knob at 0 or the needle will break in striking
the foot or plate.
Grasp outer rim of zigzag dial (A, Fig. 23) and press
down on lock B. Turn dial as far to the left as possible.
Pointer will then be on the zero mark.
(B)
cc)
CD)
Fig. 22-A Fig. 22-B
Fig. 23