SINGER W714 - Manual (Page 36)

Fig. 60
EDGESTITCHER
The edgestitcher is used in mak­
ing dainty lace insertions, edgings
and piping.
The slots in the edgestitcher
serve as guides in sewing together
various pieces of material. If you
want to sew lace, lace and embroi­
dery, or lace and tucked strips togeth­
er, place the piece of material that
will be on top in slot 1 (Fig. 61)
and the lower fabric in slot 4. For
instance, if you are sewing lace edg­
ing to a finished edge of fabric,
place the fabric in slot
1 and the
lace in slot 4 (Fig. 62).
ATTACHMENTS
Be sure machine is set in left needle position.
ATTACHMENT FOOT
In order to attach binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot
and replace it with the attachment foot. (Fig. 60)
Mount binder, edgestitcher or hemmers by
sliding the attachment to the left as possible and
tightening the screw.
The mounting slot enables you to sew as close
to or as far away from the edge as desired. Just move
the attachment to the correct position before tighten­
ing the mounting screw.
Fig.. 62
Fig. 61