Placing bobbin case in shuttle – SINGER W714 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig.
8
Fig. 9
PLACING BOBBIN CASE IN SHUTTLE
Raise needle bar to highest position, and slide cover nlate
L n K f
b
o
b
b
i
n
case iXh S
whh at
1
rr"" ®
forefinger of the left
hand
tT K
running from the top of
the bobbin case to the right. Insert and center the bobbin
case on the stud of the shuttle body, (C) Be sure the
PrisifteT hK "■
‘he shuttle race notch (A)
Press the bobbin case (B) into the shuttle as far as oossible
rdLsi th
*be shuttle. THEN
release the bobbin case latch, (D). Press bobbin case aaain
after latch has been released to make sure the bobbin case
IS locked securely in place. Close the cover plate
TENSION SPRING
Fig. 10