Trouble chart – SINGER W714 User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
29
TROUBLE CHART
Trouble
Probable Cause
Correction
If Machine
Binds
Thread or lint in
raceway
1
—With take-up lever in highest position, tilt
head back on hinges and remove bobbin case.
BOBBIN
NOTCH
RACE
LATCH
RACE COVER
CLAMPS
2
— Turn clamps outward and remove race cover.
3— Remove hook.
4— Clean thread and lint from all parts, includ
ing race.
5— Run a drop of oil along rim of hook.
6
— Replace hook, then race cover. Snap clamps
into place.
7— Grasp threaded bobbin case by latch and re
place, fitting tongue into notch of race cover.
Advertising