SINGER W714 User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

35

Be sure to draw the lace and material under the needle and back of the edgestitcher so that

the feed will carry it backward as you stitch. Hold the fabric in the left hand and the lace in
the right, being sure the fabric overlaps the lace slightly.

Rick-rack can be sewn to the edge of the material in the same manner.
To trim with wide piping place the fabric in slot 4, and the fold of the piping to the left

in slot 3, for a narrow piping place fabric in slot 2 and the folded edge of the piping to the
right in slot 3.

Slot 5 may be used as a guide in stitching a French seam.
See Figs. 63, 64, 65, and

66

for suggestions on how to use the edgestitcher. There are

hundreds of other uses.

Fig. 63

Fig. 64

Fig. 65

Advertising