Embroidering with a hoop, Darn or monogram without hoop – SINGER W714 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
píete. Look ,h»ads by sett,no sbtoh „idth a, 0 and tnktng 3 or 4 J
f
e
h
e
s
1
“
”
;
EMBROIDERING WITH A HOOP
It IS easy to follow a stamped design or to
work free hand when embroidering or monogram-
ing.
(See
Fig.
26).
Release
the
pressure
from
the foot by pressing down on the snap lock ring
darner. Push the drop feed button down all the
way.
Stretch the fabric in an embroidery hoop, and
place under the needle after removing the presser
oot. Set the stitch width at the size you prefer
and lower the presser bar lifter. Then operate the
machine at a rather high speed while moving the
out of the path of
Should you encounter skip stitches, the fabric is nnf
t
is needed (see attachments available from your dealer illustrated fn tSTL°of^t£™l)'™
DARN OR MONOGRAM WITHOUT HOOP
süt=h~~L~“'"=
^ »OW
skipped
15