Scalloping – SINGER W1166 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
f
S *>'
»«I »■
17
SCALLOPING
Dainty scallops are used extensively as self trimming on blouses, dresses, lingerie
and children,s wear.
Perfectly formed and evenly spaced scallops are produced automatically by just
setting the machine for decorative stitch design number C-1 and zigag stitch width
and buttonhole control knob at
0
.
Set the stitch length to suit. The longer the stitch length the longer the scallop.
After stitching, trim seam allowance to less than H inch and clip into turned
edges. Some fabrics may also need notching for a smooth evenly turned edge.
Turn gently, roll out scallops between fingers and press.
When forming scalloped tucks, add an extra K inch to tuck allowance for seaming.