Overcasting worn edges, Patching, Straight or three cornered tear – SINGER W1166 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
46
OVERCASTING WORN EDGES
Zigzag stitch along the worn edges, catching^e
needle^ swigs to the left, and flowing the ne^e to lust pass
over the edge of the fabric on the right Fig. 98
PATCHING
Machine
baste
patch
into
place under hole or worn area
which has been cut away. Then
zigzag stitch the patch into place
by overcasting around edge of
hole. Fig. 99
Fig 99
STRAIGHT OR THREE CORNERED TEAR
7iazac stitch along a straight tear catching fabric on left and
by swi., of .eadle, B.
you, t.nu.ou= .re
not too tiaht or puckering will be encountered.
-u
a
In menkg . three cornered te.r, zigneg etltoh iron, each end
to center fig. 100
Fig. 100