Winding the bobbin – SINGER W1166 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m-
1
^ *
% •
WINDING THE BOBBIN
you°=?SL?“ocS.® ^
*'
“-“‘‘"l™ ty turning clutch 6 toward
Place a spool of thread on one of the spool pins, lead thread through the upper thread auid^
on arm and down through tension disc 14 Fig. 5 at base of machine. Run end
ll
thrS throuah
a hole m bobbin edge left flange and from inside out) and place bobbin B on spindle of bobbin
^ ,
winder 7 Fig. 4 fitting the notch bobbin
■
over small pm on Spindle. Push bobbin
winder against hand wheel. Hold thread
end loosely and start machine slowly
Bobbin will stop winding when it is
filled. Turn clutch away from you until
sewing mechanism is again engaged so
that needle moves when you turn the
hand wheel.
Break off loose thread end used to
start the winding and thread bobbin as
stated on Page
6