Blind hem stitching – SINGER W1750C User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BLIND HEM STITCHING
This stitch will sew without stitches showing on right side of fabric.
1. Fold the fabric as shown
on drawing.
2. The guide (A) on the
blind foot ensures even
feeding of the fabric
when blind hem stitch
ing. The guide (A) is
adjusted by turning the
adjusting screw (B).
3. Place fabric so that the
straight stitches are on
the protruding hem edge
and the zigzag stitches
just catch one thread of
the folded edge.Turn
the screw so that the
guide barely touches the
folded edge of fabric. .
4. Lower the presserfoot
and sew hem,guiding
fabric evenly along the
guide.
5. Turn the fabric over
when you have completed
sewing.
0
Overcasting
\
1 —
1cm
Wrong Side
Wrong Side
5mm
5mm
-
22
-