SINGER W1750C - Manual (Page 26)

1 2 3 4
<---- >
6
/.Machine will sew the buttonhole in the
order as shown and stop automatically
after sewing.
8. Raise the presser foot and cut thread.
To sew over same buttonhole, raise
presser foot to return to original position
9. Cut center of buttonhole being careful
not to cut stitches on either side. Use
a pin as a stopper.
CAUTION:To prevent accidents.
When using seam ripper, do not put your
finger in the path of ripper.
A. WHEN SEWING STRETCH FABRIC
It is suggested that you use interfacing on
the backside of the fabric.
Note: Density of buttonhole legs may be
adjusted with stitch length control.
-
24
-