Helpful hints – SINGER W1750C User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HELPFUL HINTS
PROBLEM
CAUSE
CORRECTION
PAGE
• Machine not properly threaded.
Re-thread machine.
13
Upper thread
• Thread entwined around bobbin.
Remove entwined thread.
12
breaks
• Needle inserted incorrectly.
Re-insert needle.
6
• Thread tension too tight.
• Thread of incorrect size or poor
Readjust thread tension.
17
quality.
Choose correct thread.
18
Lower thread
breaks
• Bobbin threaded incorrectly.
• Bobbin wound unevenly or too
Re-thread the bobbin.
12
full.
Rewind the bobbin.
11
• Dirt on the bobbin holder.
Clean the holder.
30
• Needle inserted incorrectly.
Re-insert needle.
6
Machine skips
• Bent or blunt needle.
Insert new needle.
6
stitches
• Incorrect size of needle.
Choose correct size needle
for fabric.
18
(on stretch fabric)
(use stretch needle)
• Machine not properly threaded.
Re-thread machine.
13
Fabric puckers
• Bobbin threaded incorrectly.
Re-thread the bobbin.
12
• Blunt needle.
Insert new needle.
6
• Thread tension too tight.
Readjust thread tension.
17
Machine makes
• Bobbin threaded incorrectly.
Re-thread the bobbin.
12
loose stitches
• Machine not properly threaded.
Re-thread machine.
13
or loops
• Tension not adjusted properly.
Readjust thread tension.
17
Threader does
• Needle is not raised.
Raise the needle.
8
not thread
• Needle inserted incorrectly.
Re-insert needle.
6
needle eye
• Bent needle.
Insert new needle.
6
Machine does
not feed
• Feed dogs are lowered.
Raise the feed dogs.
8
properly
• Lint and dust accumulated around
feed dogs.
Clean the feed dogs area.
30
• Fabric pulled while sewing.
Do not pull fabric.
15
• Needle is hitting the presser foot.
Select correct foot and pattern.
19
Needle breaks
• Needle inserted incorrectly.
Re-insert needle.
6
• Incorrect size needle or thread for
fabric being sewn.
Choose correct size needle
and thread.
18
Machine runs
• Dirt or lint accumulated in the hook
Remove the needle plate
30
with difficulty
race and feed dog.
and bobbin holder and clean
the hook race and feed dog.
• Cord not plugged into electrical
outlet.
Insert plug fully into outlet.
7
• Power switch is not turned on.
Turn on the switch.
7
Machine will not
run
• Bobbin winder spindle is pushed to
the right.
Push spindle to the left.
11
• Presser foot is not lowered.
• Buttonhole Sewing Mode;
Lower the foot.
15
Buttonhole lever is not lowered
completely.
Lowerthe buttonhole lever.
23
Buttonhole foot is not attached.
Attach the buttonhole foot.
23
-
31
-