SINGER S10 - Manual (Page 14)

PSW Option 1.10
Pull Compensation
Pull compensation extends and adds additional stitches to the edges of a
block to overlap or join an adjacent block. This is used to eliminate gaps or
spaces between blocks. PSW 1.1 has a new function under Stitch
Parameters that lets you type in the compensation you would like, thus
allowing you to use Autotrace for more designs.
To Fix an Existing Design:
1. Click on Load
2. In the Load dialog box, select a design and click OK.
»t- 1
3. Click Edit Outline I
4. Click the mouse on the block to be edited
5. Click Stitch Parameters icon
6. Set the Pull Compensation
to 8
(This number is high to
demonstrate how the block
will extend out. Normally you
will use a smaller number)
Click OK.
Strtcfi Parameters
. Oensiy.
Sttplon^tv
■ f^mngaidchlftrigt)-
' S<Uinvil(№’
PaltMn
pc”..
30
T ?s>u
0
• Underfe^ -
- (3iins(y ' )20.(l
it
r M
P Mo lefvelcn set Si- 1
1 Put) Cnrrfittnsirtap.
r^i
Ofc Conce)
Oefeuii
7. Click the right mouse
8. Click on Embroidery Simulator.
9. Click on the arrow to activate the Simulator.
10. Notice how the block now extends out into the next block.
The stitches will expand according to the stitch direction.