Psw option 1.1, Digitizing-create method: outline fill – SINGER S10 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PSW Option 1.1
Digitizing-Create Method: Outline Fill
Important Note:
Make sure the direction lines or inclination lines cut through the
stitching area.
Make sure the lines are placed in order from left to right or right to left.
Do not cross the direction lines.
10. After all the direction lines are input click the right mouse to end the
inclination function.
11. In the lower left prompt line it states Input the first point. Click
the left mouse where you would like the machine to start sewing this
segment.
12. The lower left prompt line now states Input the last block point.
Click the left mouse where you would like the machine to stop
sewing this segment.
13. The segment will now' fill with stitches.