Psw option 1.1, Digitizing-create method: outline fill – SINGER S10 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PSW Option 1.1
Digitizing-Create Method: Outline Fill
There are now six Create Methods for digitizing.
The Outline Fill digitizing method is used to plot multiple angles of the
stitches within a segment.
r-ll
\
•A
X |i
1.
Open an image to digitize.
2.
Click on the Current Method icon
3.
Choose the Outline Fill method.
4.
Choose the Stitch Type.
soUn
Saiifi
Step 1/1
Step 1/3
Step 1/2
S:&p '¿ii'.n
6
.
Click the right mouse to activate the digitizing function. In the lower
left prompt line it states Input the outline
Click the left mouse around a segment of the image to input the
reference points.
Remember:
A short left mouse click creates curved lines. A long left mouse click or
simutanuously pressing Alt and the left mouse creates straight lines.
F9 deletes the last point.
7.
Click the right mouse to close the
digitized segment.
8.
The prompt line states Input the
directions
9.
Click the left mouse outside the block
area, move the mouse to create the stitch
direction. Click the left mouse a second
time to enter the selected direction, again
making sure it is outside the block.
y'
r
\
«s
fr- e