SINGER 610U User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING A SEAM
1. Lower presser foot.
Raise stitch regulator to reverse.
2. Back-stitch to edge of fabric for re
inforcement.
3. Lower stitch regulator.
Stitch to end of seam.
5. With take-up lever at highest point,
raise presser foot and remove fabric.
4. Raise stitch regulator.
Back-stitch to reinforce end of seam.
6. Cut threads on thread cutter at rear of
presser bar.
TO STITCH WITH CLOTH GUIDE
The cloth guide aids in attaining uniformity of seam
width.
The guide is secured to the bed of the machine in
either of the threaded holes to the right of the slide
plate. To guide seam stitching straight and parallel to
the edge of the fabric, guide the fabric edges lightly
against the guide while stitching.
13