SINGER 610U User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Applique adds beauty and interest to clothes and

household linens. Either contrasting or self fabric can

be used effectively.

The stitch most commonly used in appliqueing is

basic pattern

J

closely spaced to form a satin stitch.

The width of this and other basic patterns can be

varied to accommodate fabrics of different weaves and

textures. Combination patterns and variations can also

be used to applique with decorative stitching.

To prepare for appliqueing, make a sample to help

you decide which of the following two methods is the

more appropriate for your fabric and design.

• Position the design.

• Baste it to the fabric.

• Attach Special Purpose Presser Foot

(and General Purpose Throat Plate).

Method

1.

Set Stitch Pattern and Stitch Width Selectors for

desired applique stitch. Set Stitch Length Regula­

tor on

FINE

(above

20).

2. Stitch, outlining the design with applique stitching.

3.

Trim any excess fabric on the outer edges of the

stitching. Remove basting.

Method ^2

1. Adjust selectors for straight stitching

(AN 3).

2. Outline the entire design with a short stitch.

3. Trim raw edges to the stitching.

4.

Readjust selectors for stitch pattern and width desired,

and set Stitch Length Regulator on

FINE.

5.

Stitch,

following

the

straight-stitch

outline.

This

step will produce a smooth overedged finish, with

no raw edges to be trimmed. Rernove basting.

CORDED APPLIQUE

The Special Purpose Foot, which provides for a filler

cord is most suited for corded applique work. Gimp,

crochet thread, etc. are generally used for filler cord.

Follow either Method #1 or #2, described above.

The only difference in corded applique is the introduc­

tion of the cord, over which the applique stitching is

formed.

To Threod Filler Cord

1. Place the spool of filler cord on the table, floor, or

in your lap.

2. Unw’ind a suflicient amount to avoid tension or

strain on the cord.

3. Lead the end of the cord through the eyelet in front

center of the Special Purpose Foot.

4. Draw the cord under and in back of the foot.

5. Proceed with stitching as for regular applique stitch.

28

Advertising