SINGER 610U User Manual
Page 24
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
By using two needles at once, you can produce two
parallel,
closely
spaced,
decorative
lines
of
stitching
simultaneously. You can choose either a straight-stitch
setting or decorative stitching (basic patterns). Com
bination patterns can not be used for two-needle work.
Some of the attractive designs you can create are
shown on page 23.
To Prepore for Two-Needte Stitching
1. Fill bobbin with enough thread to complete stitching.
2. Loosen thumb screw on needle clamp and insert
two needles, as illustrated.
To Thread the Machine
1. Place spool of thread on horizontal spool pin. Thread
as for one-needle stitching except:
• Pass thread between center and back tension discs.
• Pass thread through eye of left needle.
2. Raise top cover lid A and insert vertical spool pin
B into hole C provided for it, as shown below.
3. Place spool of thread on vertical spool pin. Thread
as for one-needle stitching except:
• Pass thread between center and front tension discs.
• Pass thread through eye of right needle.
• Do not attempt to pass thread through guide on
top cover lid.
Make certain that only thread from horizontal spool pin
is carried through last guide D on the needle clamp.
22