SINGER 610U User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELEVEN CONTROLS (Continued)
8.
THREAD TENSION DIAL
This dial regulates the degree of tension on your
needle thread and lets you select just the right setting
for your stitch pattern, thread, and fabric.
To determine correct tension setting, make a test on
a sample of your fabric. If the fabric puckers, decrease
tension. If the stitches look loose, increase tension.
• To decrease
tension, turn to lower number.
• To Increase
tension, turn to higher number.
9.
BOBBIN THREAD TENSION
Bobbin thread tension too tight—correct by turning
screw counterclockwise.
Bobbin thread tension too loose—correct by turning
screw clockwise.
A perfectly locked stitch results with upper and lower
tensions balanced so that needle and bobbin threads are
drawn equally into fabric.
10.
BUTTONHOLE STITCH SELECTING DIAL
This dial is used when stitching buttonholes and magic
patterns.
• For buttonhole, set dial to “Bl” and “B2”.
• For magic patterns, set dial to “MAGIC”.
• For regular stitching, set dial to “OFF”.
Always push disc follower releasing lever to the right
before moving this selecting dial.
r—«№*1
twit»!!ianii!J3agiiiiiiri
11.
STITCH DENSITY CONTROL DIAL
This dial controls stitch density when making button
holes.
• For closely spaced stitches, turn dial upward.
• For open stitches, turn dial downward.
• For regular stitching, set dial to
t