Inserting the bobbin, Attention – SINGER 2250 TRADITION User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Inserting the Bobbin
When inserting or removing the bobbin, the needie must
be fuiiy raised.
- Remove the extension table, then open the hinged cover. (1 )
- Puil the bobbin case tab (a) and remove the bobbin case. (2)
- Hoid the bobbin case with one hand, insert the bobbin so
that the thread runs in a clockwise direction (arrow). (3)
- Puii the thread through the siit and under the finger. (4)
Leave a 6 inch taii of thread.
- Hoid the bobbin case by the hinged latch. (5)
- Insert it into the shuttle. (6)
Attention:
Turn power switch to off ("O") before inserting or
removing the bobbin.
Advertising