Sewing on buttons – SINGER 2250 TRADITION User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sewing on Buttons
Install the darning plate. (1)
Change the all purpose foot to button sewing foot. (2)
Position the work under the foot.
Piace the button in the desired position and iower the foot.
Set the Pattern Selector Dial on " j" and sew a few securing
stitches. Select one of the two narrow zig-zag patterns
according to the distance between the two holes of the button.
Turn the handwheel to check if the needie goes into the right
and the left hole of the button without hitting the button. Siowly
sew on the button with about 10 stitches.
Seiect pattern" ] " and sew a few securing stitches. (3)
If a shank is required, place a darning needle on top of the
button and sew. (4)
For buttons with 4 holes, sew through the front two holes first,
push the work forward and then sew through the back two
hoies.