SINGER 1371A2 User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
'liTACKlNGiWIDfHyANb OVEREbGlil(^EreRENCE POSITIdNim^
№rn^mmnn^
mmn,
K^siiirAiiiT®,
The needle swings from right to left with the right base line established as the reference
position.
Perform the adjustment as follows
1) To adjust stitch width ® , screw in or out screw
® ,
and set pointer @ to a desired
value on scale plate @. The actually sewn stitch width will be the half of the set scale
value (mm).
2) For adjustment of bar tacking width ® , screw in or out screw ®, and set pointer
®
to
the value indicated by scale plate pointer @ , making the bar tacking width twice as
large as the stitch width.
24
Advertising