Adjusting the speed transmitter fig2v, Adjustment of the needle thread trimmerfig28 – SINGER 1371A2 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
24.
1^1127
24. ADJUSTING THE SPEED TRANSMITTER
Fig2v
Tio
* Adjustment of the position of the belt shifter
When the hand stop crank is turned down to the low speed position, loosen screw ® and
allow the belt to move onto low-speed pulley ®, moving the position of belt shifter @.
* Adjusting the stopper screw
Perform adjustment by stopper screw
@
so that belt shifter @ does not cause the belt to
come off high-speed pulley ® during high speed operation.
25.®^3? JlMi§=P №8
25. ADJUSTMENT OF THE NEEDLE THREAD TRIMMER
Fig28
31
Advertising