SINGER 1371A2 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
26.ADJUSTMENT OF NEEDLE THREAP TRIMMER HOLDER AND LIMITING PLATEFi«:!»
S;.(fi $ tt®ip ± ^ s ft® is I®-B)
Loosen setscrew and install and adjust limiting plate (D so that it comes in contact
with the blocking arm ® at the time.of slow start of the machine (when latch B ® is
engaged with latch A ©).
Needle thread trimmer holder ® should be installed in such manner that it engages with
cam @ by 0.5mm (1/64") when the needle thread trimmer opens.