Straight stitching – SINGER W166 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10
STRAIGHT STITCHING
For straight sewing on fine fabric or very soft material,
you may want to use the straight stitch presser foot and the
straight stitch needle plate which are included in your accessory
box. Botli have narrow needle slots.
■gffANGlNG THE FOOT AND PLATE.
To change
presser foot (13, Fig. 1) loosen thumbscrew (15, Fig. 1) and
remove zigzag foot.
Replace with hinged narrow foot and tighten screw securely.
To change Neelde plate (12, Fig. 1) remove it after you
pull out slide plate to the left (Fig. 12 A) and then you can
change needle plate to straight stitch plate.
—^
stitch width at 0 or the needle will
break in striking the foot or plate.
Fig. 11’A
I'ig. 11 H