Now to – SINGER W166 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE SET OF HEMMERS
35
Before attacliiiig any of the hemmers, be sure bobbin thread
is pulled up. Then, with bemmer in place, bold top thread loosely
and turn handwheel one full turn toward you, making a loop
under bemmer. Cirasp bobbin thread with both hands and slip
horizontally under bemmer toward back. Bobbin thread will catch
loop and carry upper thread to back of bemmer.
bold material in
1/8
inch for two iticbes along edge, bold at
each end of fold. Slip fold into guide and up over spoon. (Fig. 43).
bold hem in material back of bemmer. Draw forward to end
of hem and fasten with point of needle. Pull on threads gently as
you start stitching.
Fig. 4.-i
DARNING SPRING
now TO
ATl'ACn
Remove presser foot, unthread needle, place darner spring,
on needle and slip book up over bub on needle clamp.
PATCHING AND MONOGRAMMING
See page. No. 18 Fig. 44.