Threading the, Bobbin case – SINGER W166 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
fi
.
at
'SIIRFA(
S|
;L‘d so that
THREADING THE
BOBBIN CASE
Step 1 (illustrated in Fig. 6).
Hold bobbin case between thumb and
forefinger of left hand, so that the slot
ill the edge of the bobbin case is on top.
Гаке the bobbin between tliumb
and forefinger of right hand so that the
thread on top leads from left to right.
Step 2. In.sert bobbin into bobbin
case, pull the thread into the slot of the
bobbin case as shown in Fig. 7, and draw
It under tlie tension spring and into the
fork-shaped opening of the spring as
shown in Fig. 8.
Fig. 6 (
Fig. 7
SLOT
Advertising