Cleaning and oiling the shuttle – SINGER W166 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
26
CLEANING AND OILING THE SHUTTLE
(See Figs. 36 and 37)
The stitch forming mechanism occasionally becomes clogged with loose threads and lint. This will
interfere with the efficient operation of the machine. Cleaning and removal of the lint will safeguard the
performance. To remove the shuttle assembly, proceed as follows.
1. Turn the balance wheel until the needle reaches its highest position. Tilt head back on its hinges.
2. Remove bobbin case (A), Fig. 37.
3. Turn the two shuttle race cover clamps (B) outward and remove the shuttle race cover (C) and
shuttle body (D).
Fig. .'!6
1/
i
Fig. :n
Advertising