SINGER W166 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
53
Fig. 38
THE EDGESTITCHER
The edgestitcher is used in making lace
insertions, edgings and pipings. The slots
serve as guides. To sew lace edging to
fabric, place the material you want on top
in slot. Fig. 39, and other piece in slot
4
.
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the hemmers,
It IS necessary to remove the jjresser foot and replace it with
the attachment foot. Fig. 38.
Mount binder, edgestitcher or hemmers sliding the attach
ment to the left as far as possible and tighten screw.
I he mounting slot enables you to sew as close to or as far
away from the edge as desired, just move the attachment to
the correct position before tightening the mounting screw.
To irio, will,
0
wide pipiog, p|.,„
¡„
slo, d
b (t o may he used as a guide m stitching a french seam.