SINGER W1240 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TWIN NEEDLE UPPER THREADING
• Follow threading instruction for single needle with these exception,
• Place thread, matching or contrasting in color, on both spool pins.
• Draw threads through thread guides as normal, but separate the
threads at the tension.
• Pass on thread through the left disc and one thread through the right
disc.
• Now treat both threads as one until you reach the needle eyes.
ZIGZAG DIAL: Set at desired width between "0" and "3," if you set
dial higher than 3, the needle will hit the needle plate and break.
STITCH LENGTH: Set at desired stitch length.
adjusting
feed
dog
HEIGHT
Upper position of feed dog is used for normal sewing. To raise feed
dog.
Press drop feed button
"Jk4k."
located under shuttle cover to upper
position.
Lower position is used for Embroidering, Mending or Sewing on
Button. Press drop feed button "UT" to lower position.