Winding the bobbin, To disengage the hand wheel, To wind thread onto bobbin – SINGER W1240 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING THE BOBBIN
TO DISENGAGE THE HAND WHEEL:
• Hold the hand wheel (1) with left hand, turn clutch (2)
counterclockwise with right hand to disengage as shown.
TO WIND THREAD ONTO BOBBIN:
* Lead thread through spring thread guide (4) and through the hole in
your bobbin from the inside out.
* Place the bobbin onto the bobbin winder shaft (3).
* Push the bobbin winder to the right.
Hold loose end of thread firmly and turn hand wheel to make thread
^'9ht. Apply gradual pressure on foot pedal until automatic shut off
^ disengage bobbin winder.
*“Ut off loose end of thread.
Advertising